Traxxas 48077 Manuel d'utilisateur télécharger pdf (Page 10)

•

NITRO 4-TEC 3.3

INSTALLING TRANSMITTER BATTERIES

Your TQi transmitter uses 4 AA batteries. The battery compartment

is located in the base of the transmitter.

1. Remove the battery compartment door by pressing the tab and

sliding the door open.

2. Install the batteries in the correct orientation, as indicated in the

battery compartment.

3. Reinstall the battery compartment door and snap it closed.

4. Turn on the transmitter and check the status LED for a solid

green light.

If the status LED ﬂashes red, the transmitter batteries may be weak,

discharged or possibly installed incorrectly. Replace with new

or freshly charged batteries. The power indicator light does not

indicate the charge level of the battery pack installed in the model.

INSTALLING RECEIVER BATTERIES

The radio receiver in your Nitro 4-Tec uses 4 AA batteries. The receiver

battery holder is located underneath the top plate, just to the right of

the fuel tank.

1. Press the tab on

the reusable zip

tie to release the

battery holder.

2. Remove the battery

holder and install 4

AA alkaline batteries.

Make careful note of

the battery polarity using the diagrams in the

battery holder.

3. Stretch a rubber balloon over the battery

holder to prevent fuel contamination.

4. Install the battery holder into the car

and secure it to the top plate with the

reusable zip-tie. Make sure the battery

holder is secure in the model and will not

come loose to prevent interference with the

middle drive belt.

If the radio system doesn’t

appear to work when the

transmitter and receiver

switches are turned on, check

for correct battery installation.

3, 5

TRAXXAS TQ

RADIO SYSTEM

Use the Right Batteries

Your transmitter uses AA

batteries. Use new alkaline

batteries; do not use

rechargeable batteries.

Rechargeable batteries will

not provide sufﬁcient voltage

for optimum transmitter

performance.

Caution: Discontinue running

your model at the ﬁrst sign of

weak batteries (ﬂashing red

light on the transmitter) to

avoid losing control.

Your model can be upgraded with the RX

Power Pack NiMH rechargeable receiver

battery (part #3037). This battery eliminates

the 4-cell battery holder and the need to

replace alkaline batteries. Traxxas

recommends the EZ-Peak Plus charger (part

#2933) for recharging the battery. A special

wiring harness (part #3034) is required for the Nitro 4-Tec (includes a

handy external charging jack).

Traxxas’ integrated TRX Power System is the easiest way to add the

power and economy of rechargeable batteries to your Nitro 4-Tec.

Consult your hobby dealer for purchasing information.

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 39 40

Commentaires sur ces manuels

Pas de commentaire

Traxxas 48077 Manuel d'utilisateur Page 10

Commentaires sur ces manuels

Produits connexes et manuels pour Jouets Traxxas 48077