Traxxas 64077 Manuel d'utilisateur télécharger pdf (Page 32)

•

XO-1

ADVANCED TUNING GUIDE

LED Color / Pattern Name Notes

Solid green Normal Driving Mode See page 15 for information on how to use your transmitter controls.

Slow red (0.5 sec on / 0.5 sec off) Binding See page 16 for more information on binding.

Flashing fast green (0.1 sec on / 0.15 sec off) Throttle Trim Seek Mode

Turn the Multi-Function knob right or left until the LED stops ﬂashing.

See sidebar for more information.

Flashing medium red (0.25 sec on / 0.25 sec off) Low Battery Alarm Put new batteries in the transmitter. See page 13 for more information.

Flashing fast red (0.125 sec on / 0.125 sec off) Link Failure / Error

Transmitter and receiver are no longer bound. Turn the system off and then back on to

resume normal operation. Find source of the link failure (ie out of range, low batteries,

damaged antenna).

Programming Patterns

Counts out number (green or red) then pauses Current menu position See Menu Tree for more information.

Fast green 8 times Menu setting accepted (on SET)

Fast red 8 times Menu SET invalid User error such as trying to delete a locked model.

LED Color / Pattern Name Notes

Solid green Normal Driving Mode See page 15 for information on how to use your transmitter controls.

Slow red (0.5 sec on / 0.5 sec off) Binding See page 16 for more information on binding.

Flashing fast red (0.125 sec on / 0.125 sec off) Fail-Safe / Low-Voltage Detect

Consistent Low-Voltage in the receiver triggers Fail-Safe so there is enough power to

center the throttle servo before it completely loses power.

TRANSMITTER LED CODES

RECEIVER LED CODES

throttle/brake travel (on the throttle channel). This allows you to ﬁne-

tune the servo settings to prevent binding caused by the servo moving

steering or throttle linkages (in the case of a nitro car) farther than their

mechanical limits. The end point adjustment settings you select will

represent what you wish to be the servo’s maximum travel; the Steering

Percentage or Braking Percentage functions will not override the End

Point settings.

Steering and Throttle Sub-Trim

The Sub-Trim function is used to precisely set the neutral point of the

steering or throttle servo in the event that simply setting the trim knob

to “zero” does not completely center the servo. When selected, Sub-Trim

allows ﬁner adjustment to the servo output shaft’s position for precise

setting of the neutral point. Always set the Steering Trim knob to zero

before making ﬁnal adjustment (if required) using Sub-Trim. If Throttle

Trim has been previously adjusted, the Throttle Trim will need to be

reprogrammed to “zero” before making ﬁnal adjustment using Sub-Trim.

Setting Lock

Once you’ve adjusted all of these settings the way you like them, you

may want to disable the Multi-Function knob so none of your settings

can be changed. This is especially handy if you operate multiple vehicles

with a single transmitter via Traxxas Link

™

Model Memory.

Multiple Settings and the Multi-Function Knob

It is important to note that settings made with the Multi-Function knob

are “overlaid” on top of each other. For example, if you assign the Multi-

Function to adjust Steering Percentage and set it for 50%, then reassign

the knob to control Steering Sensitivity, the transmitter will “remember”

the Steering Percentage setting. Adjustments you make to Steering

Sensitivity will be applied to the 50% steering throw setting you selected

previously. Likewise, setting the Multi-Function knob to “disabled” will

prevent the knob from making further adjustments, but the last setting

of the Multi-Function knob will still apply.

Throttle Trim Seek Mode

When the Multi-Function knob is

set to throttle trim, the transmitter

remembers the throttle trim

setting. If the throttle trim knob is

moved from the original setting

while the transmitter is off, or while

the transmitter was used to control

another model, the transmitter

ignores the actual position of

the trim knob. This prevents the

model from accidentally running

away. The LED on the face of the

transmitter will rapidly blink green

and the throttle trim knob (Multi-

Function knob) will not adjust the

trim until it is moved back to its

original position saved in memory.

To restore throttle trim control,

simply turn the Multi-Function

knob either direction until the LED

stops blinking.

Failsafe

Your Traxxas radio system is

equipped with a built-in failsafe

function that returns the throttle

to its last saved neutral position in

the event of a signal loss. The LED

on the transmitter and the receiver

will rapidly ﬂash red.

LED Color / Pattern Name Notes

Blue LED off Connecting mode

Traxxas Link App is not running on

a paired device.

Slow blue

(0.5 sec on / 0.5 sec off)

Pairing mode

See above for information on pairing

the module with Traxxas Link App.

Solid blue Connected

See page 12 for information on how

to use your transmitter controls.

TRAXXAS LINK MODULE LED CODES

1 2 ... 27 28 29 30 31 32 33 34 35 36

Commentaires sur ces manuels

Pas de commentaire

Traxxas 64077 Manuel d'utilisateur Page 32

Commentaires sur ces manuels

Produits connexes et manuels pour Jouets Traxxas 64077